This is a 3D watch design made available by LulzBot (click here for instructions). The cuts of the watch are genuine watch pieces which needed to be ordered. The band and watch body were 3D printed in PLA on my Monoprice Maker Select 3D printer. The model provided by LulzBot had a lot of problems…
— more info coming soon — Nov. 28, 2017 Update: Project was featured on the Rutgers CS Website – “Prof. Bekris’ collaboration with ExxonMobil and EOHSI on Contaminant Measurement using Robots”. Click here to read the news item. Video featured on Rutgers TV Video of the assembly Video of Tests
— more info coming soon —
I have been printing a lot lately. Mostly parts and molds needed for my Master’s Thesis, as well as gifts and such. Ever since I got my second 3D printer, I have been using a RaspberryPi running OctoPrint (which is just WONDERFUL!). For those that are not familiar with it, Octoprint is essentially a gcode…
(Note: The picture on the right shows the fins mounted directly onto the jaws of the Kuka youBot. This was just a preliminary test and we realized the importance of the scissor-like motion, since otherwise we could only grasp very small objects due to the short travel of the parallel fingers). I am starting…
— more info coming soon — Video Tests
It is a well-known fact that some 3D printing filaments are hygroscopic (they absorb moisture from the air). For some (like ABS) this is noticeable but you can still produce usable prints. Nylons on the other hand become completely useless for printing after even just a few hours out in the open. Since I am…
Tevo Tarantula (kit) I was tired of running to the HackRSpace and Makerspace all the time and knowing that I had to do a lot more 3D printing for my Master’s Thesis, I finally pulled the trigger and ordered the very well-reviewed Tevo Tarantula 3D printer kit for about $200. Most of the 3D printers…
I was looking for something to print on my 3D printer and realized that a few knobs from various appliances are missing (radio, range hood, space heater). I took some measurements and used OnShape to design them and Simplify3D to slice. Printed in ABS on my modified Tevo Tarantula 3D printer. Since some of these…